Hi Anton, I want to imprint IC’s to a cream or lotion. Do I use a chemical free product? What kind of cream or lotion do I use and do you know a source I can purchase it from? Thank you for your help!
Hola anton, Quiero imprimir circuitos integrados en una crema o loción. ¿Utilizo un producto libre de químicos? ¿Qué tipo de crema o loción uso? ¿Conoce alguna fuente donde pueda comprarla? ¡Gracias por su ayuda!
Ever time I try to get my ICI pad to start , I can only get to the site where the imprint name is listed but the orange „start transfer“ never appears so I can’t use it
Cada vez que trato de iniciar mi pad ICI, solo puedo acceder al sitio donde aparece el nombre de la impresión, pero el naranja "iniciar transferencia" nunca aparece, por lo que no puedo usarlo.
Hello Anton, After I imprint my water “ how much” water do I consume ( one ounce, two ounces, etc) 3 times a day? Please give me total minimum amount that I then can divide by three. Thank you!
Hola Antón, Después de imprimir mi agua, "¿cuánta" agua consumo (una onza, dos onzas, etc.) 3 veces al día? Por favor, dame la cantidad mínima total que luego puedo dividir por tres. ¡Gracias!
Hello Anton , unfortunately I dropped my IC Glow Pad and now it’s not working anymore . If I touch the audio cable at the end which is to be connected to the smartphone , it then lights up briefly - but not if I run an IC . Can it be repaired or what could I do ? I am waiting for the launch of the new IC Pad (3.0.) , but that means waiting until September/Oktober and I don’t want to be without a pad until then . I suppose I will have to buy version... Ver más
Hello Anton , unfortunately I dropped my IC Glow Pad and now it’s not working anymore . If I touch the audio cable at the end which is to be connected to the smartphone , it then lights up briefly - but not if I run an IC . Can it be repaired or what could I do ? I am waiting for the launch of the new IC Pad (3.0.) , but that means waiting until September/Oktober and I don’t want to be without a pad until then . I suppose I will have to buy version 2.0. again .
Hola Antón, desafortunadamente se me cayó mi IC Glow Pad y ahora ya no funciona. Si toco el cable de audio en el extremo que se va a conectar al teléfono inteligente, se enciende brevemente, pero no si ejecuto un IC. se puede reparar o que puedo hacer? Estoy esperando el lanzamiento del nuevo IC Pad (3.0.), pero eso significa esperar hasta septiembre/octubre y no quiero quedarme sin pad hasta entonces. Supongo que tendré que comprar la versión 2.0.... Ver más
Hola Antón, desafortunadamente se me cayó mi IC Glow Pad y ahora ya no funciona. Si toco el cable de audio en el extremo que se va a conectar al teléfono inteligente, se enciende brevemente, pero no si ejecuto un IC. se puede reparar o que puedo hacer? Estoy esperando el lanzamiento del nuevo IC Pad (3.0.), pero eso significa esperar hasta septiembre/octubre y no quiero quedarme sin pad hasta entonces. Supongo que tendré que comprar la versión 2.0. de nuevo .
Hi Anton, I noticed new downloads were available- Are they automatically or manual? Email has been messing up so if there is a link can you please send? Thank you, Jeff
Hola Anton, noté que había nuevas descargas disponibles. ¿Son automáticas o manuales? El correo electrónico se ha estado desordenando, así que si hay un enlace, ¿puedes enviarlo? gracias, jeff
Mir ist das Glow-Pad leider hinunter gefallen und ein kleiner Teil des Glases abgesprungen, nur 1-2 mm, aber leider ist jetzt unter der Glasplatte ein Lufteinschluss. Kann ich es trotzdem noch verwenden? Kann ich es reparieren?
Desafortunadamente, dejé caer la almohadilla luminosa y se rompió una pequeña parte del vidrio, solo 1-2 mm, pero desafortunadamente ahora hay una bolsa de aire debajo de la placa de vidrio. ¿Todavía puedo usarlo? puedo arreglarlo
Hi Anton, could you provide a little more information on the globules Daniel mentioned in one of the videos. About how long does the imprint last? I'm looking for a more travel friendly solution that's not quite so reliant on drinking so much water. Also, will these work? Thank you.
Hi Anton, could you provide a little more information on the globules Daniel mentioned in one of the videos. About how long does the imprint last? I'm looking for a more travel friendly solution that's not quite so reliant on drinking so much water. Also, will these work? Thank you.
Hola Anton, ¿podrías proporcionar un poco más de información sobre los glóbulos que Daniel mencionó en uno de los videos? ¿Aproximadamente cuánto tiempo dura la impresión? Estoy buscando una solución más amigable para viajar que no dependa tanto de beber tanta agua. Además, ¿funcionarán estos? Gracias.
Hola Anton, ¿podrías proporcionar un poco más de información sobre los glóbulos que Daniel mencionó en uno de los videos? ¿Aproximadamente cuánto tiempo dura la impresión? Estoy buscando una solución más amigable para viajar que no dependa tanto de beber tanta agua. Además, ¿funcionarán estos? Gracias.
Hi, can I use an ic imprint with my ic pad and place it on my body like the ic pemf, instead of transferring it to water. Also, can I use the same imprint or pemf everyday. Thank you.
Hola, ¿puedo usar una impresión ic con mi almohadilla ic y colocarla en mi cuerpo como el ic pemf, en lugar de transferirla al agua? Además, ¿puedo usar la misma impresión o pemf todos los días? Gracias.
i am having trouble connecting my ic hummer via blue tooth i tried on 2 different cellphones and a laptop and none of these devices can find the ic hummer . any suggestions?
tengo problemas para conectar mi ic hummer a través de un diente azul probé en 2 teléfonos celulares diferentes y una computadora portátil y ninguno de estos dispositivos puede encontrar el ic hummer. ¿alguna sugerencia?
Hi, I just started infopathy. When I press transfer it stops in less than a minute and then I press play and a few seconds later it pauses again. It has done this on almost every ic I have tried. Please let me know how to make it play through the entire time. Thank you
Hola, acabo de empezar infopatía. Cuando presiono transferir se detiene en menos de un minuto y luego presiono reproducir y unos segundos más tarde se detiene nuevamente. Ha hecho esto en casi todos los circuitos integrados que he probado. Por favor, hágame saber cómo hacer que se reproduzca todo el tiempo. Gracias
I want to imprint IC’s to a cream or lotion. Do I use a chemical free product? What kind of cream or lotion do I use and do you know a source I can purchase it from? Thank you for your help!
Quiero imprimir circuitos integrados en una crema o loción. ¿Utilizo un producto libre de químicos? ¿Qué tipo de crema o loción uso? ¿Conoce alguna fuente donde pueda comprarla? ¡Gracias por su ayuda!
After I imprint my water “ how much” water do I consume ( one ounce, two ounces, etc) 3 times a day? Please give me total minimum amount that I then can divide by three. Thank you!
Después de imprimir mi agua, "¿cuánta" agua consumo (una onza, dos onzas, etc.) 3 veces al día? Por favor, dame la cantidad mínima total que luego puedo dividir por tres. ¡Gracias!
unfortunately I dropped my IC Glow Pad and now it’s not working anymore . If I touch the audio cable at the end which is to be connected to the smartphone , it then lights up briefly - but not if I run an IC . Can it be repaired or what could I do ? I am waiting for the launch of the new IC Pad (3.0.) , but that means waiting until September/Oktober and I don’t want to be without a pad until then .
I suppose I will have to buy version... Ver más
unfortunately I dropped my IC Glow Pad and now it’s not working anymore . If I touch the audio cable at the end which is to be connected to the smartphone , it then lights up briefly - but not if I run an IC . Can it be repaired or what could I do ? I am waiting for the launch of the new IC Pad (3.0.) , but that means waiting until September/Oktober and I don’t want to be without a pad until then .
I suppose I will have to buy version 2.0. again .
desafortunadamente se me cayó mi IC Glow Pad y ahora ya no funciona. Si toco el cable de audio en el extremo que se va a conectar al teléfono inteligente, se enciende brevemente, pero no si ejecuto un IC. se puede reparar o que puedo hacer? Estoy esperando el lanzamiento del nuevo IC Pad (3.0.), pero eso significa esperar hasta septiembre/octubre y no quiero quedarme sin pad hasta entonces.
Supongo que tendré que comprar la versión 2.0.... Ver más
desafortunadamente se me cayó mi IC Glow Pad y ahora ya no funciona. Si toco el cable de audio en el extremo que se va a conectar al teléfono inteligente, se enciende brevemente, pero no si ejecuto un IC. se puede reparar o que puedo hacer? Estoy esperando el lanzamiento del nuevo IC Pad (3.0.), pero eso significa esperar hasta septiembre/octubre y no quiero quedarme sin pad hasta entonces.
Supongo que tendré que comprar la versión 2.0. de nuevo .
Thank you, Jeff
gracias, jeff
... Ver más
https://www.amazon.com/Homeopathic-Blank-Pellets-Globules-30-1LB/dp/B08FF597BC/ref=sr_1_2?hvadid=570465446550&hvdev=t&hvlocphy=9003503&hvnetw=g&hvqmt=b&hvrand=12096466354551314706&hvtargid=kwd-303802414009&hydadcr=26075_13484622&keywords=homeopathy+globules&qid=1686437734&sr=8-2
... Ver más
https://www.amazon.com/Homeopathic-Blank-Pellets-Globules-30-1LB/dp/B08FF597BC/ref=sr_1_2?hvadid=570465446550&hvdev=t&hvlocphy=9003503&hvnetw=g&hvqmt=b&hvrand=120964663 54551314706&hvtargid=kwd-303802414009&hydadcr=26075_13484622&palabras clave= homeopatía+glóbulos&qid=1686437734&sr=8-2
i tried on 2 different cellphones and a laptop and none of these devices can find the ic hummer .
any suggestions?
probé en 2 teléfonos celulares diferentes y una computadora portátil y ninguno de estos dispositivos puede encontrar el ic hummer.
¿alguna sugerencia?